Spraymark System

The CTI Spraymark system is very similar in appearance to the Hallmark system. There are however, a few differences that make the Spraymark system considerably more economical and less labor intensive.

The two main differences between the Hallmark and Spraymark systems is the Spraymark is applied without the application of a skim coat. In other words, the entire job is simply sprayed 100% over the bare prepped concrete, and then highlighted and sealed.

In order to eliminate the skim coat a new more advanced modifier was formulated for the Spraymark system . The 112 modifier utilizes nano technology in order to provide better adhesion without the skim coat. The mix ratio’s for the 112 modifer are the same as the regular 110 and 111 modifiers, and they are interchangeable. 112 Modifier can be used for all other CTI applications.

Applications best suited for the Spraymark system are those that require little if any concrete repairs and few serious cracks. Cracks are addressed by simply sponging grout directly into the crack before spraying.

Generally, the Spraymark system does not incorporate any patterns due to the lack of a skim coat. However, patterns can be taped out on the bare concrete prior to spraying. The Spraymark system requires about 1/3 less material and about ½ the labor of the hallmark application and can therefore be sold at a lower price. The Spraymark system offers a 1 year warranty similar to the Designers series. It is a highly cost effective alternative.